60W Encapsulated Single Phase audio toroidal transformer Low Frequency Power for Audio Ampllifier
● Compact Design: Space-saving, low magnetic interference for efficient use.
View Details
Audio Toroidal Transformer for Hi-Fi Power Amplifiers
Provides electrical isolation between primary and secondary circuits, protecting sensitive audio components from power line surges, spikes, and DC offset . This significantly lowers the noise floor, revealing improved dynamics, imaging, and bass response in audio systems.
View Details
EE25-4.0H 1:1:1:1 Audio Isolation Transformer - Four Matched 4.0 H Windings | 20 Hz to 20 kHz | DIP In-Line Through-Hole | PCB Mount
The EE25-4.0H is a PCB-mountable audio isolation transformer built on the EE25 in-line bobbin platform. A 1:1:1:1 turns ratio and four matched 4.0 H windings give the part galvanic isolation between circuits, rejection of the AC hum created by system grounding, and clean coupling of balanced or unbalanced audio signals across the 20 Hz to 20 kHz range. It is used for voice and data coupling, for breaking ground loops between pieces of equipment, and for providing an isolated
View Details
EI-4120W-5409 Dual Voltage Power Transformer - 110 V / 220 V Input | 12 V-0-12 V and 24 V 250 mA Output | EI-41 Silicon Steel Core | Chassis Mount
EI-4120W-5409 Dual Voltage Power Transformer, chassis mount, EI-41 silicon steel core, 110 V / 220 V dual primary, 12 V-0-12 V and 24 V 250 mA secondary, 8 solder tabs.
View Details
HotEI Laminated Power Transformer, 10 W to 30 W, 110/220 V Primary to 12/24/48 V Secondary, Class B/F Insulation, EMI Metal Case, Lead Harness
EI laminated power transformer for 110 V / 220 V AC mains. The designation covers a build-to-order family rated from 10 W to 30 W, with the secondary wound for 12 V, 24 V or 48 V AC. Construction is an EI lamination stack with a layer-insulated winding on a flame-retardant bobbin, vacuum impregnated and enclosed in a sheet metal case on a two-flange mounting bracket.
View Details
EI14 600:600 Ohm Low Frequency Audio Isolation Transformer
Galvanically isolates primary and secondary circuits to eliminate ground loop hum, static, and interference in audio transmission paths.
View Details
EI14 600 Ohm : 600 Ohm Audio Isolation Transformer - 1:1 Vertical PCB Through-Hole Hard Pin | 300 mH Inductance | 1000 VAC Hi-Pot | Voice Band 300 Hz - 3.5 kHz
EI14 Vertical Audio Isolation Transformer, 600 Ω : 600 Ω. Reference part number ZXY-B2127-2 (EI14 series, hard-pin version).
View Details
EI2401-1:2 Audio Isolation Transformer - 1:2 Step-Up, +6 dB Gain, 20 Hz-20 kHz, EI Silicon Steel, 3+3 DIP Pins, Passive Ground Loop Isolator
EI2401-1:2 audio isolation transformer, 1:2 step-up, approximately +6 dB voltage gain, passive galvanic isolation, 20 Hz - 20 kHz, 3+3 through-hole DIP.
View Details
EI28 Low Frequency Power Transformer 220V to 12V –Vertical PCB Pin Mount Core Voltage Converter
● EI28 Laminated Silicon Steel Core: Stacked EI core in Z11 silicon steel sheet for stable magnetic performance.
View Details
EI30 1.5VA 230V to 9V Low Frequency Transformer for PCB
Provides 3.75kV-4.2kV isolation between primary and secondary circuits, protecting sensitive downstream electronics from voltage spikes and electrical faults.
View Details
EI48 Potted PCB Mount Transformer, 220 V AC to 12 V AC, 10 VA, Epoxy Sealed, Through-Hole Pins, 50.7 x 38.3 x 43 mm
EI48 potted transformer wound for a 220 V AC primary and a 12 V AC secondary at 10 VA, in a through-hole package. The designation on the label carries all four facts in one string, EI48-10W/VA 220V/12V, so the ordering description can be built from the series, the rating and the voltage pair without a separate catalogue number.
View Details
EI60 24V AC Power Transformer – 60W Single Phase Autotransformer with 50/60Hz Compatibility
● 60W Power Rating: Suitable for various low-power supply applications
View Details