HotZXY-DU135 Microphone Transformer, Flying-Lead Audio Isolation Type, 50 Hz - 20 kHz, Turns Ratio 1:1.2 / 1:2 / 1:5, Laminated Silicon Steel Core, 19.5 x 13.0 x 16.5 mm
ZXY DU135 microphone transformer, flying-lead type, in the 1:1.2, 1:2 or 1:5 turns ratio. Laminated silicon steel core, copper winding on a nylon bobbin under an insulation wrap, four colour-coded leads, 50 Hz to 20 kHz frequency range, body 19.5 mm long, 16.5 mm high and 13.0 mm across.
View Details
ZXY-DU18 Permalloy Audio Isolation Transformer, 1+1:1+1 and 1+1:3.5+3.5, 10 Hz to 100 kHz, DIP
ZXY-DU18, a wideband audio isolation transformer in a sealed permalloy alloy housing with DIP through-hole mounting. Eight pins in two rows of four at 5.0 mm pitch, outline 38.5 mm by 24.5 mm and 22.0 mm high. Two winding variants are supplied, 1+1:1+1 and 1+1:3.5+3.5, with the DC resistance and the turns ratio differing between them and everything else shared.
View Details
ZXY-EC42 Low Loss High Frequency Ferrite Core Transformer
Optimized for 40kHz – 500kHz switching frequencies, supporting up to 1MHz for modern SMPS, LLC resonant converters, and DC-DC converter designs
View Details
ZXY-ED12.6-20H SMD Audio Isolation Transformer, Permalloy Core, 100 Hz - 20 kHz, 1:1 Turns Ratio, 20 H Inductance, 10-Pin SMD, 17.8 x 13.3 x 10.0 mm
ZXY-ED12.6-20H SMD 10 pin permalloy core audio isolation transformer for signal coupling. Sealed permalloy core in a tape wrap, primary on pins 1-5 and secondary on pins 6-10, ten formed SMD pins, 1:1 turns ratio, 20 H minimum primary inductance, 100 Hz to 20 kHz, body 10.0 mm high by 17.8 mm long by 13.3 mm wide.
View Details
ZXY-ED8-10 1:1 Audio Isolation Transformer, 600 Ohm to 400 Ohm Line Matching, ED8X10-2.0H Laminated Core, Gull-Wing Terminals in a 14 mm Package
ZXY-ED8-10 is the product name and ED8X10-2.0H is the type: ED8X10 for the package, which measures 0.555 in by 0.313 in by 0.197 in, and 2.0H for the 2.0 henry minimum inductance. The part carries no printed label. What little marking there is sits on the bobbin between the core and the clamp, where it is too small to read in the photographs and too dark to photograph against the varnish; the only place the type appears in full is on the documents.
View Details
ZXY-ED8 Permalloy Audio Isolation Transformer — 600:600 & 10K:600, 0.1-5 W, 2.0 kV AC, Shielded SMD
ZXY-ED8, a miniature shielded permalloy audio isolation transformer in a surface-mount package, for low-power audio and communication circuits from 0.1 W to 5 W. Two standard impedance ratios are supplied, 600:600 and 10K:600, and custom ratios are wound to order. The core is permalloy, the housing is a miniature metal shielding shell, and the bobbin is a V-0 flame-retardant moulding rated for 130 °C insulation.
View Details
ZXY-ED8X10-2.0H 600 Ohm : 600 Ohm SMD Audio Isolation Transformer - 1:1 Ratio | Glue-Sealed | 300 Hz to 4 kHz | RoHS Compliant
The ZXY-ED8X10-2.0H is a small glue-sealed SMD audio isolation transformer built on an ED8 x 10 laminated core. Two matched windings give 1:1 galvanic isolation between a 600 ohm line port and a 400 ohm device port, with a flat response across the 300 Hz to 4 kHz band, for board-level use in audio, voice and communication equipment.
View Details
ZXY EE25-1:1A Audio Transformer, EE25 Series 1:1 Turns Ratio, Ferrite Core, Through-Hole PCB Mount, 25.5 x 18.5 x 22.0 mm, 5.0 mm Pin Pitch
ZXY EE25-1:1A audio transformer, EE25 series, 1:1 turns ratio. High-frequency ferrite core in a metal frame, PA66 bobbin, vertical through-hole PCB mount on a 5.0 mm pin pitch, body 25.5 x 18.5 x 22.0 mm, primary pins 1-4, secondary pins 5-8.
View Details
ZXY-EE25 Flying-Lead Audio Isolation Transformer - 1:4 Turns Ratio | 65mH / 900mH Inductance | AC 500V Isolation | CCC CE RoHS UL
The ZXY-EE25 is a compact audio isolation transformer built on a high-grade EE25 silicon-steel core and terminated with multi-color flying leads. With a 1:4 turns ratio, an inductance range of 65 mH to 900 mH at 1 kHz and pre-stripped, tinned copper lead tips, it provides impedance matching, galvanic signal isolation and ground-loop noise rejection in professional audio, broadcast, communication and industrial audio equipment.
View Details
HotZXY EI10 Audio Transformer - EI10 Shell-Type Core with Black Clamp, Copper Winding with Yellow Tape, Molded Green Bobbin, DIP Through-Hole Pins, CCC CE RoHS UL
ZXY EI10 audio transformer. ZXY EI10 Series precision audio transformer, single phase, DIP through-hole pins, carton packed.
View Details
ZXY-EI16 Fly-Lead Microphone Transformer, Audio Isolation Type, 50 Hz - 20 kHz, 1:5 and 1:6 Turns Ratio, EI16 Laminated Steel Core, 16.5 x 14.5 x 14.5 mm
ZXY EI16 fly-lead audio isolation microphone transformer, in the 1:5 version type B2456 or the 1:6 version type B2577. EI16 laminated steel core, insulated bobbin with a protective tape wrap over the coil, four colour-coded leads, 50 Hz to 20 kHz, body 16.5 mm long, 14.5 mm high and 14.5 mm deep.
View Details
ZXY-EI19 Hard-Pin Audio Isolation Transformer, EI19 DIP Through-Hole, 1:1 / 1:5 / 1:11 Turns Ratio, 100 Hz-4.5 kHz, Hi-POT 500 V, 19.5 x 15 x 17 mm
ZXY-EI19 EI19 hard-pin audio isolation and voice / data coupling transformer. DIP through-hole package, 19.5 x 15 x 17 mm, 5 mm pin pitch, turns ratio 1:1, 1:5 or 1:11 depending on model, frequency range 100 Hz to 4.5 kHz, Hi-POT 500 V at 1 mA for 60 s.
View Details