Hot2R2 High Current SMD Power Inductor Flat Wire Wound Iron Core Inductor for DC-DC Converters
● 2.2µH Inductance, ±20% Typical: Marked 2R2 on the top face for easy identification.
View Details
60W Encapsulated Single Phase audio toroidal transformer Low Frequency Power for Audio Ampllifier
● Compact Design: Space-saving, low magnetic interference for efficient use.
View Details
AU-100 Dual Channel Audio Isolator for Studio Recording
Rugged Brushed Aluminum Enclosure: Housed in a heavy-duty, premium black brushed aluminum chassis that offers exceptional electromagnetic shielding, physical durability, and a sleek, professional aesthetic.
View Details
AU-100 Dual Channel Audio Isolator, Ground Loop Hum Eliminator, XLR / 6.35 mm TRS / RCA / 3.5 mm AUX, 20 Hz-20 kHz
AU-100, a two-channel audio isolator in a desktop housing. It sits in the signal path between two pieces of equipment that share a mains earth and removes the hum and buzz that the resulting ground loop puts on the line. Each channel has its own transformer, so the two are isolated from each other as well as from the equipment on the far side.
View Details
Audio Isolation Transformer PCBA Board 10K:10K 600:600 10K:600
Professional PCBA Integration: As shown in the dual-transformer module design, precision surface mounting and through-hole integration deliver a clean, robust, and ready-to-install audio board solution that eliminates messy internal wiring.
View Details
Audio Toroidal Transformer for Hi-Fi Power Amplifiers
Provides electrical isolation between primary and secondary circuits, protecting sensitive audio components from power line surges, spikes, and DC offset . This significantly lowers the noise floor, revealing improved dynamics, imaging, and bass response in audio systems.
View Details
EE25-4.0H 1:1:1:1 Audio Isolation Transformer - Four Matched 4.0 H Windings | 20 Hz to 20 kHz | DIP In-Line Through-Hole | PCB Mount
The EE25-4.0H is a PCB-mountable audio isolation transformer built on the EE25 in-line bobbin platform. A 1:1:1:1 turns ratio and four matched 4.0 H windings give the part galvanic isolation between circuits, rejection of the AC hum created by system grounding, and clean coupling of balanced or unbalanced audio signals across the 20 Hz to 20 kHz range. It is used for voice and data coupling, for breaking ground loops between pieces of equipment, and for providing an isolated
View Details
EE5.0 SMD High Frequency Current Transformer with Ferrite Core and 3+3 Pin for High Frequency Adaptability
● High-frequency current sensing: engineered to measure and monitor high-frequency current and to output a signal proportional to the primary current.
View Details
EI-4120W-5409 Dual Voltage Power Transformer - 110 V / 220 V Input | 12 V-0-12 V and 24 V 250 mA Output | EI-41 Silicon Steel Core | Chassis Mount
EI-4120W-5409 Dual Voltage Power Transformer, chassis mount, EI-41 silicon steel core, 110 V / 220 V dual primary, 12 V-0-12 V and 24 V 250 mA secondary, 8 solder tabs.
View Details
HotEI Laminated Power Transformer, 10 W to 30 W, 110/220 V Primary to 12/24/48 V Secondary, Class B/F Insulation, EMI Metal Case, Lead Harness
EI laminated power transformer for 110 V / 220 V AC mains. The designation covers a build-to-order family rated from 10 W to 30 W, with the secondary wound for 12 V, 24 V or 48 V AC. Construction is an EI lamination stack with a layer-insulated winding on a flame-retardant bobbin, vacuum impregnated and enclosed in a sheet metal case on a two-flange mounting bracket.
View Details
EI14 600:600 Ohm Low Frequency Audio Isolation Transformer
Galvanically isolates primary and secondary circuits to eliminate ground loop hum, static, and interference in audio transmission paths.
View Details
EI14 600 Ohm : 600 Ohm Audio Isolation Transformer - 1:1 Vertical PCB Through-Hole Hard Pin | 300 mH Inductance | 1000 VAC Hi-Pot | Voice Band 300 Hz - 3.5 kHz
EI14 Vertical Audio Isolation Transformer, 600 Ω : 600 Ω. Reference part number ZXY-B2127-2 (EI14 series, hard-pin version).
View Details