EI2401-1:2 Audio Isolation Transformer - 1:2 Step-Up, +6 dB Gain, 20 Hz-20 kHz, EI Silicon Steel, 3+3 DIP Pins, Passive Ground Loop Isolator
EI2401-1:2 audio isolation transformer, 1:2 step-up, approximately +6 dB voltage gain, passive galvanic isolation, 20 Hz - 20 kHz, 3+3 through-hole DIP.
View Details
EI28 Low Frequency Power Transformer 220V to 12V –Vertical PCB Pin Mount Core Voltage Converter
● EI28 Laminated Silicon Steel Core: Stacked EI core in Z11 silicon steel sheet for stable magnetic performance.
View Details
EI30 1.5VA 230V to 9V Low Frequency Transformer for PCB
Provides 3.75kV-4.2kV isolation between primary and secondary circuits, protecting sensitive downstream electronics from voltage spikes and electrical faults.
View Details
EI48 Potted PCB Mount Transformer, 220 V AC to 12 V AC, 10 VA, Epoxy Sealed, Through-Hole Pins, 50.7 x 38.3 x 43 mm
EI48 potted transformer wound for a 220 V AC primary and a 12 V AC secondary at 10 VA, in a through-hole package. The designation on the label carries all four facts in one string, EI48-10W/VA 220V/12V, so the ordering description can be built from the series, the rating and the voltage pair without a separate catalogue number.
View Details
EI60 24V AC Power Transformer – 60W Single Phase Autotransformer with 50/60Hz Compatibility
● 60W Power Rating: Suitable for various low-power supply applications
View Details
EI66*28 Encapsulated Audio Isolation Transformer - 220 V 50 Hz Primary | 23 V ±5% No-Load Output | H50N EI66 Laminated Core | 60 mm Max Height | Chassis Mount
EI66*28 Encapsulated Audio Isolation Transformer. Model / Part No. EI66*28, ZXY Part No. B2348, core size EI66x28, specification 20230803003.
View Details
HotEL14 Horizontal Audio Isolation Transformer, Through-Hole PCB Mount, 300 Hz - 3.4 kHz, 1:1 Turns Ratio, EI1401 / EI1402, 16 x 8.5 mm
EL14 horizontal audio isolation transformer for voice and data coupling, in the EI1401 or EI1402 variant. Precision ferrite core, primary on pins 1-2 and secondary on pins 4-3 under yellow tape insulation, four through-hole pins, 300 Hz to 3.4 kHz, body 16 mm maximum length and 8.5 mm high.
View Details
ER14.5 High-Frequency Ferrite Core SMD Transformer, NiZn Pulse Transformer for AC-DC Power Supplies
ER14.5 high-frequency ferrite core transformer for surface-mount power supplies. NiZn power ferrite core, copper windings on terminals 1-3 and 4-6, encapsulated capsule case, tin-plated lead-free gullwing terminals, horizontal mount, body 15.0 x 12.0 x 7.0 mm maximum.
View Details
Ground Loop Audio Isolator Audio Transformer PCBA Permalloy Nickel Alloy 600:600 600:10k 10k:10k
● Permalloy (Nickel Alloy) Core: High-permeability core for low-level audio signals.
View Details
High-Efficiency Drum Core SMD Power Inductor for DC-DC Converters
Designed to handle high current while maintaining a compact physical footprint, ideal for modern DC-DC converter applications.
View Details
High Voltage Transformer 700W 800W for Light Wave Oven & Microwave Oven EI Power Transformer
● 700W / 800W Power Class: Matched to 700W and 800W microwave and light wave ovens.
View Details
Industrial Grade Air Core Induction Coil, 86 x 30.5 x 14 mm Rectangular Hollow Winding, Multi-Strand Copper, Tab or Lead Terminals
This page describes a rectangular hollow air core induction coil: a flat wound coil of multi-strand round copper wire, with no magnetic core and no bobbin inside the window, taped for high temperature service and terminated either with male tab terminals or with insulated lead wires. The dimensioned build measures 86 mm outer length, 30.5 mm across the short side and approximately 14 mm side height, with an R3 radius on the four outer corners and a general tolerance of ±0.5 m
View Details